Infeed Conveyor Intro

Introduction - Infeed Conveyor

1.3D Model

• Product Contact Parts         - MS Powder Coated RAL 7045
• Product Non-Contact Parts - SS304

2. Infeed Conveyor Operation

• In-feed conveyor receives sachets in groups of four from the Bossar machine and transports them through the wall and into the Cartoner.
• The conveyor also incorporates the camera-based vision system for inspection of sachets.
• Non picked sachets are collected at the end of the conveyor in a collection tray. Incorrectly picked sachets are collected in separate trays adjacent to each Hornet Robot.

3. Maintenance

 Important Precautions: -

READ this manual before operating or servicing this equipment.

•  ALWAYS remove power and wait at least 30 seconds before connecting / disconnecting any internal harnesses. Failure to observe these precautions may result in damage to, or destruction of the equipment.
• ALWAYS take proper precautions when handling static sensitive devices.
• SAVE this manual for future reference.
• DO NOT allow untrained personnel to operate, clean, inspect, maintain, service or tamper with this equipment. 
• DO NOT connect or disconnect any digital or analogue components to the equipment with power connected or damage may result.

Refer click the below Maintenance Schedule for Infeed Conveyor

• Maintenance Schedule

4.Spare Parts

Note: Click on the Description for the details about Spare Parts

5.Risk Assessment

Risk Assessment or HAZOP, or a Hazard and Operability Study, is a systematic way to identify possible hazards in a work process. In this approach, the process is broken down into steps, and every variation in work parameters is considered for each step, to see what could go wrong. 

Please refer the below attachment for HAZOP Document

• Risk Assessment

6.Troubleshooting

Troubleshooting is the process of identifying, diagnosing, and resolving problems or issues that arise in various systems, equipment, or processes. it involves a systematic approach to problem-solving, using a combination of analytical, technical, and problem-solving skills.

The first step in troubleshooting is to identify the problem. This can involve gathering information about the issue, including when it started, what systems or equipment are affected, and any error messages or symptoms that are observed. Once the problem is identified, the next step is to diagnose the root cause. This involves analyzing the information collected and using technical knowledge to determine what is causing the issue. After the root cause is identified, the next step is to develop a plan for resolving the issue.

Refer the below about the Troubleshooting.

Troubleshooting