- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
1.Introduction - Chassis
1.1 3D Model
1.2.Chassis Operation
- Chassis provides support to the different sub-assemblies.
1.3. Maintenance
Important Precautions.
READ this manual before operating or servicing this equipment.
- ALWAYSremove power and wait at least 30 seconds before connecting / disconnecting any internal harnesses. Failure to observe these precautions may result in damage to, or destruction of the equipment.
- ALWAYS take proper precautions when handling static sensitive devices.
- SAVE this manual for future reference.
- DO NOT allow untrained personnel to operate, clean, inspect, maintain, service or tamper with this equipment.
- DO NOT connect or disconnect any digital or analogue components to the equipment with power connected or damage may result.
Refer click the below Maintenance Schedule for Chassis
2.Introduction- Guards
2.1 3D Model
Door Material – Polycarb
Door Switches _ i10-E0354 Safety switches (Sick Make) & 10 Qty
2.2 Guards Operation
- Guards cover the equipment and provide safety protection for operation of the equipment
2.3 Spare Parts
Note: Click on the Description for detail manual
Sr.no. | Description | Part No. | Critical Spare | Recommended Spare |
14. | SICK.6053788 |
| X | |
12. | SICK.5306529 |
| X | |
36. | SICK.5306527 |
| X | |
16. | SICK.6036492 |
| X | |
13. | Parth Magnetic Door Catch | I425-2201 | X | |
28. | SMC Vacuum Generator ZK2B10K5RW-06 | SMC.ZK2B10K5RW-06 | ||
Pneumatic Spares | ||||
1. | Pressure Relief Valve 3 Port VHS40-04B | SMC.VHS40-04B | X | |
2. | Silencer SMC | AN40-04 | X | |
3. | Filter Regulator SMC | AW40-04DH-B | X | |
4. | Pressure Sensor SMC | ISE35-N-65-PLA | X | |
6. | Silencer SMC | AN20-C10 | X | |
7. | SIL 110 9.19ID x 14.3OD N70 O-Ring | I900-1804 | X | |
8. | 3 Port Solenoid Valve VP342-5DZ1-01A | SMC.VP342-5DZ1-01A | X | |
9. | Silencer AN10-01 | SMC.AN10-01 | X |
Was this article helpful?